Notes on Safety • Adhere to the safety regulations of the manufacture of your drive machines under all circumstances (e.g. electric drill, right-angle grinder etc.). • These appliances have to be in accordance with the VDE-regulations Appliances built after 1995 have to have a CE-sign. • Disconnect the power: - before changing of attachments - before changing of work pieces - before maintenance jobs - while not in use • Before commencing work test the operatability of the appliances and tools. Never work with damaged or blunt tools. • Check that the mounting of the appliances used is correct (e. g. bolted joints) before commencing work. • Ensure the work piece is tight and secure. • The space between the worktable and the backing pad should be no more than 3 mm. • Take care that there is always a stable support for the workpiece or clamp the component to be machined tightly. • Take care that you and the appliances used are always standing securely. • Adhere to the data quoted regarding minimum/speeds and direction of rotation on the product, packaging or in the operating instructions for the appliances and tools to be used. • Use tools only for their actual intended purpose. • Never remove existing protective devices. • Use goggles or breathing protection for mouth/nose during all jobs, that cause dust, chips, fumes or sparks. • Protect your hearing when doing work causing a lot of noise. • Wear safety glasses, strong protective gloves and a mouth and nose protector for all work in which dust, shavings, fumes or sparks occur. • Never reach into equipment which is in operation. • Take care that all electrical equipment is protected against wet, dust and dampness. • Keep children away from your workshop and store your equipment and tools in a safe place. • Never allow inexperienced personnel to work with your equipment and tools without instructions or supervision. • Always work well planned and concentrated. • Keep your work area orderly. • Use only original wolfcraft ® spare parts