Safety notes . In case of skin contact with the adhesive, rinse with run- ning water and soap. . After eye contact, rinse with plenty of water and consult a doctor. . If swallowed, seek medical advice immediately. Disposal Your product is delivered in a solid packaging, in order to protect it against transport damages. The packaging con- sists of recyclable materials. Dispose it in an environmentally suitable manner. Do not throw the product into the normal domestic waste at the end of its service life, but ask your municipal administ- ration about the possibility of an environmentally friendly disposal. Installation Instructions . Only allow experts carry out the installation work. . Glue application: First thoroughly clean all surfaces with suitable cleaning agents. Glue cannot be used on wall- paper, gypsum boards, polyethylene (PE), polypropylene (PP) and polytetrafluoroethylene (PTFE, Teflon). Adhesive processing temperature + 5C to + 40°C. . CAUTION DANGER OF WATER DAMAGE! Before installa- tion please ensure that there are no water pipes where you are intending to drill. . Warning - risk of electrocution! Make sure that there are no electrical power lines where you are drilling before starting to drill holes. Care instructions These products require special care. Therefore, please obser- ve the following instructions: . Chrome-plated surfaces are sensitive to limedissolving agents, acidic cleaning agents and all kinds of abrasives. . Never clean coloured surfaces with abrasive, corrosive, or alcoholic agents. Decommissioning . Glue application: Remove the back plate. Use a scraper to remove silicone glue residue from the wall. . Disassemble the product in the reverse order of the assem- bly instructions. 1 The illustrations are to be considered as figurative representations, deviations of the product are possible. Subject to technical modifications.