Safety notes . Please only allow qualified persons to carry out the installation. . CAUTION: WATER DAMAGE! Please shut off the general water supply prior to installation. . Make sure that all seals are correctly fit. . Only suitable for use in rooms with a temperature over 0° C - shut off water supply when there is a risk of frost . Despite careful production, sharp edges can occur. Please exercise caution! Disposal Your shower drain is delivered in a solid packaging, in order to protect it against transport damages. The packaging consists of recyclable materials. Dispose it in an env- ironmentally suitable manner. Do not throw the product into the normal domestic waste at the end of its service life, but ask your municipal administration about the possibility of an environmentally friendly disposal.A Installation Instructions . Mark the placement of the shower channel based on the planned installation location · For a direct wall mounting, the factory- formed thin-bed flange is slid as far as up to the finished wall to ensure adequate sealing . Align the shower channel horizontally . The connection piece of the odour trap housing fits all insertion pipe coupling systems DN 50 . In order to prevent the contamination of or damage to the rust surface, this surface is protected with a foil which should be pulled off proper to operation. . In case of faulty installation, the warranty is excluded - especially for follow-up damage! Instructions for care Shower drains require special care. Therefore, please observe the following instructions: . Please clean all parts with conventional cleaning agents. In case of strong calcification, mild decalcifiers may be used. . To maintain the effect of the brushed surface, it may be freshened up from time to time with an abrasive cleaner or a scouring pad. . If the care instructions are not complied with, damage to the surface should be expected. In this case, warranty claims can no longer be made.