Safety notes . Only allow experts carry out the installation work. · CAUTION DAMAGE BY WATER! Prior to installation please turn the general water supply off. . Ensure that all gaskets have the correct fit. . These taps are not suitable for use on low pressure and small electrical storage heaters. . We recommend the installation of a filter into the appliance or at least the use of angle valves with filter, in order to avoid the inflow of foreign matter, which could damage the cartridge. . This tap is only intended for use in private households! Only suitable for use in rooms with a temperature over 0 C, when there isdanger of frost, sut off the water supply and empty the tap. If the tap not used for a longer period, we recommend to initially let a larger quantity of water flow through before withdrawing water. Take care when adjusting the warm water. Danger of scalding! Incorrectly installed fittings can cause water damages! Please ensure that no caustic or corrosive products such as detergents or household cleaning products make contact with the connection hoses; this can lead to water damages. Despite careful production, sharp edges can occur. Please exercise caution! DANGER OF LOSS OF LIFE AND ACCIDENT TO INFANTS AND CHILDREN! Never leave children unsupervised with the packaging materials. Danger of suffocation. CAUTION! DANGER OF INJURY! Please ensure that no parts are damaged and that all parts are correctly assembled. Incorrect assembly or fitting may lead to injury. Damaged parts can adversely affect safety and proper function. CAUTION DANGER OF WATER DAMAGE! Before installation please ensure that there are no water pipes where you are intending to drill. Examine the wall before installation and choose suitable installation fixings. We have supplied fixings suitable for an ordi- nary solid masonry wall. Please note that seals are wear parts and therefore will require to be replaced from time to time. Warning - risk of electrocution! Make sure that there are no electrical power lines where you are drilling before starting to drill holes.